(CIPTV1) Implementing Cisco IP Telephony & Video, Part 1

Course Objectives

After completing this course, you will be able to meet these objectives:

  • Describe the role of Cisco Unified Communications Manager in a Cisco Collaboration Solution, including its functions, architecture, deployment and redundancy options, and how to deploy endpoints, users, and Cisco IP Phone Services
  • Describe the functions and the purpose of a dial plan and explain how to implement on-cluster calling
  • Describe how to configure MGCP, H.323, and SIP gateways. The module also describes how to create a dial plan that supports inbound and outbound off-cluster calling for numbers and URIs
  • Describe the types of media resources that Cisco Unified Communications Manager supports, how to configure Cisco Unified Communications Manager server software-based media resources, and how to implement Cisco hardware-based media resources.
  • Describe how to implement audio and video conferencing devices that can be used with Cisco Unified Communications Manager, built-in Cisco Unified Communications Manager software audio bridge, cisco IOS-based audio and video conference bridges, and Cisco TelePresence conferencing products including Cisco TelePresence MSE 8000, Cisco TelePresence Server, Cisco TelePresence MCU, and Cisco TelePresence Conductor.
  • Provide an introduction to QoS with emphasis on the QoS components, often referred to as the QoS toolkit, that are used to provide services for various business applications.

Prerequisites

Course Prerequisites

  • Working knowledge of fundamental terms and concepts of computer networking, including LANs, WANs, switching and routing
  • Ability to configure and operate Cisco routers and switches and to enable VLANs and DHCP
  • Basics of digital interfaces, PSTN, and VoIP
  • Fundamental knowledge of converged voice and data networks

Pricing and Schedule

Classes are offered in multiple locations throughout the globe as well as through our unique Virtual Attendance options. Typically courses are offered 1-2 times each month. For more information contact us below.

Want to learn more? Click the Button and our Customer Liaison Department will reach out to help you collect any further information you may need to learn about our programs.

Course Outline

Module 1: Cisco Unified Communications Manager Introduction

  • Lesson 1: Describing the Role of Cisco Unified Communications Manager, Its Architecture, and Its Deployment and Redundancy Options
  • Lesson 2: Performing Initial Cisco Unified Communications Manager Configuration
  • Lesson 3: Deploying Endpoints and Users
  • Lesson 4: Deploying IP Phone Services

Module 2: Dial Plan Introduction and Implementation of Single-Site On-Cluster Calling

  • Lesson 1: Describing Dial Plan Components
  • Lesson 2: Implementing Endpoint Addressing and Call Routing
  • Lesson 3: Implementing Calling Privileges
  • Lesson 4: Implementing Call Coverage in Cisco Unified Communications Manager

Module 3: Implementation of Single-Site Off Cluster Calling

  • Lesson 1: Analyzing Single-Site Off-Cluster Calling Requirements
  • Lesson 2: Implementing PSTN Access Using MGCP Gateways
  • Lesson 3: Describing Cisco IOS H.323 and SIP Gateways
  • Lesson 4: Implementing PSTN Access Using H.323 Gateways
  • Lesson 5: Describing the Cisco Unified Border Element
  • Lesson 6: Using the Cisco Unified Border Element to Access the PSTN via a SIP Trunk
  • Lesson 7: Using Cisco Unified Border Element for URI Dialing
  • Lesson 8: Describing Dial Plan Interworking

Module 4: Media Resources

  • Lesson 1: Describing Media Resources in Cisco Unified Communications Manager
  • Lesson 2: Implementing Annunciators and MOH
  • Lesson 3: Implementing MTPs

Module 5: Audio and Video Conferencing

  • Lesson 1: Describing Conferencing Devices and Their Functions
  • Lesson 2: Implementing Conference Bridges
  • Lesson 3: Describing Cisco TelePresence MSE 8000
  • Lesson 4: Implementing Cisco TelePresence Server
  • Lesson 5: Implementing Cisco TelePresence Conductor

Module 6: Quality of Service

  • Lesson 1: Analyzing Quality of Service Requirements
  • Lesson 2: Describing QoS Components and their Functions
  • Lesson 3: Implementing Marking
  • Lesson 4: Implementing Policing and Shaping

Labs

  • Lab1: Configuring Cisco Unified Communications Manager Initial Settings
  • Lab 2: Deploying Endpoints and Users
  • Lab 3: Implementing Endpoint Addressing and Call Routing
  • Lab 4: Implementing Calling Privileges
  • Lab 5: Implementing Call Coverage
  • Lab 6: Implementing PSTN Calling Using MGCP Gateways
  • Lab 7: Implementing PSTN Calling Using H.323 Gateways
  • Lab 8: Implementing PSTN Calling Using SIP Trunks Through Cisco Unified Border Element
  • Lab 9: Using Cisco Unified Border Element for URI Dialing
  • Lab 10: Implementing Annunciators and MOH
  • Lab 11: Implementing Conference Bridges
  • Lab 12: Implementing Cisco TelePresence Conductor

They Choose Us To Write The Courses So You Can Trust Us To Teach Them


Scholarship Program - Nominate Someone!




Referral Program - Earn FREE Training!